1. Product Application

A heat exchanger is an energy-saving device that transfers heat between materials at two or more fluids at different temperatures. It transfers heat from a higher temperature fluid to a lower temperature fluid, allowing the fluid temperature to reach the flow. Specified indicators to meet the needs of process conditions, but also one of the main equipment to improve energy efficiency.

The AHU coil is one of the most important parts of the air handling units, and over time there is a need for AHU Cooling Coil Replacement. We offer a complete Replacement service for coils in existing air handling units or ducted systems. AHU Coil is made up of copper tubing of several turns and covered with fins to increase the heat transfer efficiency of the AHU coil. Direct expansion (DX) coils, the most common coil type of AHU, are typically either a slab coil, an A-Coil, or an N-Coil with each coil serving its own purpose for configuration and heat exchange inside the air handler. We provide custom solutions for hot and chilled water coils for your unique business requirements.

• Mainly concentrated in the fields of petroleum, chemical, metallurgy, electric power, shipbuilding, central heating, refrigeration and air conditioning, machinery, food, etc.
• Our factory currently focuses on large heat exchangers for various industry.

2. Raw Materials

TUBES

We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.

FINS

The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water. The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments. The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.

We have customized products for many customers, following are some projects we did before. We can provide designing data and production drawings.

We promise we use the design software sold by a well-known European HAVC software company. Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world. All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.

MORE THAN 15 YEARS OF SUCCESS

We specialize in researching, manufacturing and exporting Heat Exchangers, Evaporators, Condensers, air cooler and other heat transfer equipments for the varied industries since 2004.

OUR MISSION

We are committed to quality products and services to meet our customer's expectations and the needs of industrial. We are dedicated to our mission and goal and we believe in long term business relationship with our customers which is based on integrity, responsiveness and quality.

A STRATEGIC LOCATION

The normal package is wooden box. If export to European countries, the wooden box will be fumigated. If container is too tighter, we will use pe film for packing or pack it according to customers special request.